On this page
- What CAD-RADS is and why it appears on your report
- Categories 0 to 5: what the number on your report means
- P1 to P4: how much plaque there is overall
- Additional labels on the report: HRP, I, S, G, E and N
- Example: how to read a code with several parts
- What a CT coronary angiography report cannot tell you on its own
- Summary
- Frequently asked questions
A CT coronary angiography report today usually includes a short code based on the CAD-RADS scale, for example ‘CAD-RADS 2/P1’. The number indicates the most severe narrowing of a coronary artery, and the additional letters describe the total amount of plaque and particular features of the findings. The scale was created so that doctors everywhere use the same language and can agree more easily on next steps. Once you know what its parts mean, it becomes easier to follow the conversation with your doctor and ask the right questions.
What CAD-RADS is and why it appears on your report
CAD-RADS stands for Coronary Artery Disease Reporting and Data System. It was developed by professional societies for cardiovascular CT, radiology and cardiology, and the current version, 2.0, was published in 2022. The aim is to condense a complex report, which describes dozens of segments of the coronary arteries, into a single standardised code.
The code does not replace the descriptive part of the report but complements it. In the description, the radiologist states which artery is affected, where, and what kind of plaque, or deposit in the artery wall, is present. CAD-RADS then translates this picture into a category with general recommendations on what to do next. If you are interested in how the report is produced, see the guide to CT coronary angiography.
Categories 0 to 5: what the number on your report means
The number is determined by the greatest narrowing, or stenosis, found in any coronary artery. Narrowing is expressed as a percentage reduction in the artery’s diameter:
- CAD-RADS 0: no plaque and no narrowing;
- CAD-RADS 1: minimal narrowing, less than a quarter of the diameter, or plaque that thickens the artery wall without narrowing it;
- CAD-RADS 2: mild narrowing, from about a quarter to just under half of the diameter;
- CAD-RADS 3: moderate narrowing, from half to about two thirds of the diameter;
- CAD-RADS 4A: severe narrowing, from about 70 to 99 per cent, in one or two arteries;
- CAD-RADS 4B: narrowing of the left main coronary artery of more than half, or severe narrowing in all three main arteries;
- CAD-RADS 5: complete blockage of an artery.
For categories 0 to 2 with stable symptoms, additional tests to assess blood flow are usually not needed, and the focus is on prevention. For category 3, a functional assessment is often considered, meaning a test that shows whether the narrowing actually reduces blood supply. For categories 4 and 5, invasive coronary angiography is also considered. What exactly happens after such a result is described in a narrowing was found on CT: what next.
P1 to P4: how much plaque there is overall
A new feature of version 2.0 is a grading of the total amount of plaque, known as plaque burden. It is written straight after the number and has four grades: P1 means a small amount, P2 a moderate amount, P3 a large amount and P4 a very extensive amount of plaque.
Why does this matter? Two people can have the same greatest narrowing but very different amounts of disease in the rest of their arteries. The total amount of plaque says a lot about long-term risk and helps the doctor decide how intensive preventive treatment should be. It is assessed using the calcium score, the number of affected segments or visually, depending on the centre’s practice. Read more about this number in calcium score.
If the report says CAD-RADS 0, no P grade is added, because there is no plaque.
Additional labels on the report: HRP, I, S, G, E and N
After the number and the P grade, additional labels, known as modifiers, may appear. Each adds information that changes the interpretation:
- HRP indicates high-risk plaque features, for example soft, low-density plaque or plaque that expands the artery wall outwards. Such plaque is associated with a higher risk of future events, so prevention is pursued more vigorously. This is covered in more detail in types of plaque: soft, hard and mixed.
- I indicates the result of a flow assessment from CT, using FFR-CT or CT perfusion. I+ means the narrowing probably reduces blood supply, I- that it does not, and I± that the result is borderline.
- S means there is a stent in the arteries.
- G means the patient has had bypass surgery.
- E indicates an unusual finding not caused by atherosclerosis, for example a congenital anomaly or a tear in the artery wall (dissection).
- N means part of the scan could not be reliably assessed, most often because of movement or dense calcium.
When a narrowing is moderate or borderline, information about blood flow is often decisive. How it is obtained is explained in FFR-CT and CT perfusion, and you can read about the test itself on the cardiac CT perfusion page.
Example: how to read a code with several parts
The parts of the code are written in order, separated by forward slashes: first the number, then the amount of plaque, then the modifiers. Take an invented but typical example: ‘CAD-RADS 3/P2/HRP’.
- 3 means the greatest narrowing is moderate, between half and about two thirds of the artery’s diameter;
- P2 means the total amount of plaque in the arteries is moderate;
- HRP means at least one plaque has features associated with higher risk.
In a patient with stable symptoms, such a result would most often lead to a discussion about flow assessment, more intensive preventive treatment and control of risk factors. The final plan, however, always depends on your symptoms, other results and your doctor’s assessment.
What a CT coronary angiography report cannot tell you on its own
CAD-RADS is a useful tool, but it is not a verdict. The recommendations attached to the categories are general and written for typical situations. The same result can mean different things in a person with severe symptoms on exertion and in a person without symptoms.
The method itself also has limitations. With dense calcium, a narrowing sometimes looks more severe than it is, and CT on its own does not measure blood flow. That is why the report should always be interpreted by a doctor who knows your full clinical picture.
Bear in mind, too, that the report does not describe only the coronary arteries. Parts of the lungs, the aorta, the heart chambers and surrounding structures are also visible on the scan, so the radiologist lists so-called incidental findings in a separate part of the report. Most are harmless, but some require follow-up or an additional test. The CAD-RADS code does not apply to these findings, so they should be discussed separately with your doctor.
If it is not clear what the code means in your case and you would like an expert opinion, you can request a consultation about your report.
Summary
- The number from 0 to 5 in the CAD-RADS code indicates the greatest narrowing in the coronary arteries.
- The grades P1 to P4 describe the total amount of plaque and are important for decisions about prevention.
- The modifiers HRP, I, S, G, E and N add information about plaque type, blood flow, stents, bypass, unusual findings and image quality.
- The recommendations attached to the categories are general, and the final plan is made by a doctor who knows your symptoms and other results.
Frequently asked questions
Does CAD-RADS 2 mean I am ill?
It means there is mild narrowing and plaque in the artery wall. As a rule this does not require a procedure, but it is a signal to take prevention seriously.
What does the N label on the report mean?
That one or more segments of the arteries could not be reliably assessed, most often because of movement or dense calcium. The doctor then decides whether an additional test is needed.
Does CAD-RADS 4 mean I need a stent?
Not automatically. Severe narrowing is usually checked further with invasive coronary angiography or a flow assessment, and the decision about treatment also depends on your symptoms.
Why is there no CAD-RADS code on my report?
Some centres do not include it or use only a descriptive report. If you would like to know the category, ask the doctor who interpreted the scan.
The information on this website is for general guidance only and does not replace an examination, diagnosis or advice from a doctor. For decisions about your health, consult your own doctor.

