On this page
Alongside the degree of narrowing, a CT coronary angiography report often describes the type of plaque: calcified, non-calcified or mixed. In everyday language these are called “hard”, “soft” and “mixed” plaque. Coronary plaque types help the doctor judge how active the disease is and how intensive prevention should be, but plaque type alone is not a verdict. Below you will find what each type means and how it fits into the overall picture.
What is plaque in the coronary arteries?
Plaque, or atherosclerotic plaque, is a build-up of fatty material, inflammatory cells, connective tissue and sometimes calcium in the wall of a blood vessel. The coronary arteries are the vessels that supply the heart muscle with blood, and plaque develops in them over many years, often without any symptoms.
A report describes two things separately. The first is stenosis, meaning a narrowing of the channel inside the artery through which blood flows. The second is the plaque itself: how much there is, where it sits and what it is made of. An artery can carry a fair amount of plaque while blood flow remains good, because in the early stages the vessel wall often grows outwards rather than inwards. That is why plaque and narrowing are always assessed together.
CT coronary angiography is one of the few non-invasive tests that shows both the narrowing and the artery wall itself. Stress tests reveal the consequences of reduced blood flow, but they cannot see plaque that does not significantly narrow the artery.
How CT coronary angiography tells plaque types apart
A CT scanner measures how much each tissue weakens the X-ray beam. This value is expressed in Hounsfield units (HU): the denser the tissue, the brighter it appears on the image. Calcium is very dense and shows up as a bright white spot or band. Fatty and fibrous tissue are less dense and look grey, darker than the contrast-filled artery.
On this basis, the radiologist places plaque into one of three groups:
- calcified plaque — made up mostly or entirely of calcium;
- non-calcified plaque — with no visible calcium, consisting of fatty and fibrous tissue;
- mixed, or partially calcified, plaque — a combination of both components in the same lesion.
In specialist reports the term “soft plaque” is used less and less, because it does not describe the composition accurately and can be misleading. If your report says “non-calcified”, that is what is informally called soft plaque. How to read the whole report, including the labels for plaque burden, is explained in the article on the CAD-RADS scale and reading your results.
Calcified (“hard”) plaque: what it means
Calcification indicates that atherosclerosis has been present in that artery for some time. In a sense, the body “heals” the damage by depositing calcium, so this kind of plaque is generally considered more stable than non-calcified plaque. More stable, however, does not mean harmless.
Calcium is also a marker of the overall atherosclerotic burden. Across large groups of people, the more calcium there is, the higher the long-term risk of heart events. This is the basis of the calcium score, a number that measures the amount of calcium in the coronary arteries without the use of contrast.
Calcified plaque also has a technical drawback: dense calcium looks larger on the scan than it really is. This effect, known as “blooming” artefact, can make it harder to judge the degree of narrowing at the site of the calcification. With extensive calcification, the doctor may therefore suggest an additional assessment of blood flow.
Non-calcified (“soft”) and mixed plaque
Non-calcified plaque is usually considered younger and more biologically active. It may contain more fatty material and inflammatory cells and less firm structure. For this reason, such lesions are more often linked to plaque rupture, a process that can lead to clot formation and an acute heart attack.
An important feature of non-calcified plaque is that the calcium score does not detect it. A person can have a calcium score of zero and still have non-calcified plaque, particularly in younger and middle age or if they smoke. This is one of the reasons why a contrast-enhanced scan gives a more complete picture than measuring calcium alone.
Mixed plaque contains both calcified and non-calcified parts. It often represents a transitional stage, in which part of the lesion has already calcified while another part is still active. It is interpreted according to which component predominates and whether there are additional unfavourable features, described below.
Even so, “non-calcified” should not be equated with “dangerous”. A small non-calcified plaque without narrowing and without other unfavourable features is a common finding and is, above all, a prompt for good prevention.
What are high-risk plaque features?
Beyond the basic classification, the radiologist looks for several features that research has linked to a higher likelihood of a future acute coronary event. Together they are known as high-risk plaque features:
- low-attenuation plaque — part of the plaque with very low values on the CT scale, suggesting a large fatty core;
- positive remodelling — the artery wall bulges outwards at the site of the plaque, so the vessel is noticeably wider there than before and after the lesion;
- spotty calcification — tiny specks of calcium, smaller than about three millimetres, scattered within non-calcified plaque;
- napkin-ring sign — a darker plaque core surrounded by a slightly brighter rim, corresponding to a large necrotic, or dead, core.
In the current CAD-RADS 2.0 reporting system, when a plaque has at least two of these features, the report receives the additional modifier HRP (high-risk plaque). The label does not mean that a heart attack will happen, but that the plaque has characteristics that deserve particular attention in prevention.
The limitations should also be acknowledged. Assessing these features depends on image quality and the reader’s experience, and experts do not always agree. Most plaques with unfavourable features never cause a heart attack, so these features are interpreted alongside other risk factors rather than in isolation. CT also has lower spatial resolution than imaging from inside the vessel with a catheter, so some details, such as the thickness of the thin cap covering the plaque, cannot be shown reliably.
Can plaque change, and what does that mean for treatment?
Plaque is not fixed. Without treatment and with age it usually grows, whereas with good control of risk factors and appropriate therapy its growth can be slowed and its composition can change.
An interesting observation from observational research is that statins, the cholesterol-lowering medicines, can increase the proportion of calcium in plaque. In some registries, the calcified part of plaque grows faster in people taking statins than in those who are not, while the fatty, more active part does not show similar growth. This is interpreted as possible plaque stabilisation. The practical consequence is that a rising calcium score in someone taking a statin does not necessarily mean the disease is getting worse. These findings come mainly from registries rather than randomised trials, so they are interpreted with caution.
What your plaque type means for you specifically — whether medication is needed, what the cholesterol target should be, whether further tests are required — is for your doctor to assess, taking into account the full report, your symptoms, blood test results and other conditions. How to turn your results into everyday habits is described in the article from results to prevention. If a significant narrowing is described alongside the plaque, it helps to know what usually happens next when CT finds a narrowing.
If you would like the plaque description in your report explained in detail, this is possible as part of a specialist consultation on CT coronary angiography.
In summary
- CT coronary angiography distinguishes calcified, non-calcified and mixed plaque and, separately, measures the degree of narrowing.
- Calcified plaque is generally more stable but points to long-standing atherosclerosis; non-calcified plaque is more biologically active, and the calcium score cannot see it.
- High-risk plaque features (the HRP modifier) indicate plaque that deserves more intensive prevention, but they do not predict a heart attack with certainty.
- Plaque changes over time; statins can increase its calcified portion, which does not necessarily mean worsening.
- Plaque type is one piece of the puzzle, and the decision on treatment is made by your doctor based on the full report.
Frequently asked questions
Is soft plaque more dangerous than hard plaque?
On average, non-calcified plaque is considered more active and more prone to rupture. However, a small non-calcified plaque without narrowing or high-risk features is a common finding and is usually managed with good prevention.
Can plaque disappear completely?
Complete disappearance of plaque is not usual. Treatment can slow its growth and stabilise its composition, and that is the main goal.
If my calcium score is zero, can I still have plaque?
Yes. The calcium score does not show non-calcified plaque, which only becomes visible on contrast-enhanced CT coronary angiography.
What does HRP mean on my report?
It is the label for high-risk plaque and is added when a plaque has at least two unfavourable features. It means prevention is especially important, not that a heart attack is inevitable.
The information on this website is for general guidance only and does not replace an examination, diagnosis or advice from a doctor. For decisions about your health, consult your own doctor.

