On this page
FFR-CT and cardiac CT perfusion are two methods that complement CT coronary angiography when the image of a narrowing alone does not give a clear enough answer. Both try to answer the same question — does the narrowing really reduce blood flow to the heart muscle? — but they do so in different ways. FFR-CT calculates blood flow from the existing images, while CT perfusion directly shows how contrast reaches the heart muscle.
Why an image of the narrowing is sometimes not enough
CT coronary angiography is very reliable at ruling out coronary artery disease: when the arteries are clear, further tests are usually not needed. When a narrowing is found, the situation is more complex. CT shows the shape and size of the narrowing, but it does not measure how much blood flows through it.
Treatment depends on that information. A narrowing that does not reduce blood flow is generally treated with medication and risk factor control. A narrowing that causes ischaemia, meaning an inadequate blood supply to the heart muscle, may be a reason to consider opening the artery. This is why moderate and borderline narrowings also call for a functional assessment.
Calcification and stents are a further reason. Dense calcium and metal create artefacts on CT images, making the degree of narrowing at those sites harder to judge. In such cases, functional information often helps more than an even sharper image.
What is FFR-CT and how is it obtained?
FFR stands for fractional flow reserve. During conventional, catheter-based coronary angiography it is measured with a thin wire carrying a pressure sensor: the pressure beyond the narrowing is compared with the pressure before it. If the ratio is 0.80 or lower, the narrowing is considered to restrict blood flow significantly.
FFR-CT estimates this value without a catheter. Images from the CT coronary angiography are sent for computer processing, where a three-dimensional model of the coronary arteries is built and blood flow through them is then simulated. The result is a map of the vessels showing an estimated FFR value for each segment of the artery. The 0.80 threshold is interpreted in the same way as with catheter measurement.
The biggest advantage is that the patient needs no new scan, no extra radiation and no additional contrast. The analysis is done afterwards, and the report usually arrives within one to two days. The UK’s NICE recommends this method as an option for recent-onset stable chest pain, and analyses have shown that using it can reduce the number of catheter tests that ultimately show no significant disease.
What is cardiac CT perfusion?
Perfusion means the blood supply to tissue. Cardiac CT perfusion shows how contrast medium, injected into a vein, enters the heart muscle. Areas of muscle that receive less blood appear darker on the image, because less contrast reaches them.
Differences in blood supply are usually seen best under stress. Instead of exercising on a treadmill, you are given a medicine that widens the blood vessels, most often adenosine. It briefly increases flow through healthy arteries, making it clearer which part of the heart cannot keep up with the demand. A passing feeling of warmth, facial flushing, chest pressure or shortness of breath may occur, and these usually settle soon after the medicine is stopped.
There are two main ways of scanning. Static perfusion captures a single moment when the contrast is in the muscle, while dynamic perfusion takes several consecutive images as the contrast passes through, which also allows blood flow to be measured. CT perfusion is usually performed at the same visit as CT coronary angiography, so both anatomy and function are obtained. You can read more about the scan itself on the cardiac CT perfusion page.
How do FFR-CT and CT perfusion differ?
Both methods seek an answer to the same question, but they reach it by different routes:
- FFR-CT is derived from the existing images and requires no new scan; CT perfusion is an additional scan with a stress medicine.
- FFR-CT involves no extra radiation; CT perfusion adds a certain dose, which depends on the protocol and the scanner.
- FFR-CT depends on very good quality baseline images; CT perfusion directly shows the state of the muscle but has its own artefacts that can mimic a perfusion defect.
- FFR-CT assesses each artery individually; CT perfusion shows which part of the heart muscle has a poorer blood supply.
- CT perfusion can also be useful with heavy calcification or stents, where the computer model is less reliable.
Neither method is perfect. With FFR-CT, values close to the threshold, roughly between 0.76 and 0.80, can give a false-positive result, and with CT perfusion, artefacts from dense structures can mimic a defect. This is why the result is always interpreted together with the images of the arteries and the clinical picture.
Who can these methods help, and when are they not suitable?
Those who benefit most are people with stable symptoms whose CT coronary angiography has shown a moderate or borderline narrowing, as well as people with extensive calcification in whom the degree of narrowing is hard to assess. What usually happens after such a finding is covered in the article a narrowing was found on CT: what happens next, and the influence of calcium in the article on the calcium score.
FFR-CT is not suitable when the images are not of sufficient quality, for example because of movement or an irregular heart rhythm. It is also not recommended in the first month after a stent, bypass surgery or a heart attack, as there is not enough data for these situations. What CT can show after such procedures is described in the article CT coronary angiography after a stent or bypass.
There are specific limitations for CT perfusion with adenosine. The medicine is usually not given in cases of:
- asthma or other lung disease with active airway narrowing;
- certain disorders of electrical conduction in the heart, unless a pacemaker is fitted;
- very low or uncontrolled high blood pressure;
- acute coronary syndrome or a very recent heart attack.
Coffee, tea, cola drinks and chocolate reduce the effect of adenosine, so they are avoided for 24 hours before the scan. You will receive exact instructions from the team performing the scan, and general advice can be found on the page about preparing for the scan.
What the result means for further treatment
If FFR-CT or CT perfusion does not show a significant reduction in blood flow, treatment usually remains with medication and lifestyle changes, with follow-up as agreed with your doctor. If they show that the narrowing restricts blood flow, your doctor may suggest a catheter test and, if needed, opening the artery, particularly when symptoms persist despite treatment.
These methods do not replace the conversation with your doctor; they give the doctor more information. The decision on further treatment is always based on the whole picture: your symptoms, the findings, any other conditions and your preferences.
In summary
- CT coronary angiography shows anatomy, while FFR-CT and CT perfusion assess whether a narrowing really reduces blood flow.
- FFR-CT is calculated from the existing images, with no new radiation, but it requires very high-quality images.
- CT perfusion directly shows the blood supply to the heart muscle, using a stress medicine and an additional radiation dose.
- Before adenosine perfusion, coffee and other caffeinated drinks are usually avoided, and asthma and some rhythm disorders may rule it out.
- The result helps your doctor decide whether medication is enough or a further step is needed.
Frequently asked questions
Do I need a new scan for FFR-CT?
No. FFR-CT is calculated from the images of a CT coronary angiography that has already been performed, provided they are of sufficient quality.
Is CT perfusion painful?
No. The stress medicine can briefly cause warmth, flushing or chest pressure, which usually passes quickly once it is stopped.
What does an FFR-CT value below 0.80 mean?
Such a value suggests that the narrowing probably reduces blood flow significantly. It is interpreted together with the artery images and your symptoms, and values close to the threshold call for particular caution.
Can these tests be done after a stent?
CT perfusion can also be useful in people with stents. FFR-CT is not recommended in the first month after a stent or bypass, and later it depends on image quality.
The information on this website is for general guidance only and does not replace an examination, diagnosis or advice from a doctor. For decisions about your health, consult your own doctor.

